BIQU B1 3D Printer TFT35 V3.0 Touch Screen SKR V1.4 32 Bit Dual Operation System DIY I3 3D Printer. $269.00 $320.42. Note: Please note the specifications of the plug in the order(we have Japanese plug, U.S. Plug, national plug, European plug, Australian plug, British plug) If the customer needs to replace the main board, adapter board, and type c line by himself, you must pay attention to: 1. Biqu Kossel Pro Slicer Profile – Link; Ender 3 Pro Slicer Profile NEW – Link; TPU Slicer Profiles. Creality CP-01 Slicer Profile NEW – Link; Cura Profiles. Cura is a free slicer that many machine owners and manufactures use. The program is frequently updated. Unfortunately, profiles created with older revisions do not always import properly.
Click on the Printer Selection Drop Down
Choose Manage Printers..
Choose Custom -> Custom FDM Printer
Then change the name of the printer to
BIQU Magician
Click the Add Printer Button
Now change all the settings to match the settings below.
(Start G-code and End G-code will already be correct)
Don't click the Close button
Once you have entered the printer settings click on the Extruder Tab
Make sure the settings match the ones below:
Now you can click the Close button
- Now we need to add some extra settings specific to this printer.
They are stored in a profile that you need to download.
Cura Profile - BIQU Magician
If you get a warning that this file can harm your computer, click Keep (it is safe, it is just a text file)
Make sure you have the BIQU Magician printer selected
Then click the drop down for profiles
Choose Manage Profiles
Click the Import Button
Select the file you downloaded in the steps above.
Click Open, and then OK
Now you can setup your first print with these settings!
Hi Joseph. Got my FLSUN-QQ yesterday and printed some models already. So far it looks really great. This is my first printer so I'll tell you about my experience with this device:
The package arrived in just about 2,5 weeks. much faster than expected: great! It looked a bit crumpled, I guess the customs authorities opened it but nothing broken, so everything good.
The assembling was easy. I was super careful with all parts. it took me around an hour. I could have been faster, but watched the instruction video when I was already finished :D
The assenbly-manual is okay, but the design is terrible. If you got a friend that's into graphic design, please let them create a more easier readable manual.
Cura For Biqu
the manuel is good for a quick start and get into printing, the rest of the touch sceen options are not in the manual. Handbrake ts to mp4. maybe you can put in a link where to read about all the options and settings that are possible. This would be cool especially for beginners like me.
I had a little problem with 2 screw holes of the side panels that I had to assemble in the last step. The holes where too big and the thumb-screw not holding anymore. I fixed this with an M4 nut mounted behind the screw. now it holds perfectly. But this could be improved.
I had another problem with the noice while printing the first model. there was a loud rattling when the X-axis moved. after some investigation, I fixed this with some simple silicon oil on the metal rods and moved the printer head down and up a few times. now the rattling is gone and the printer is really pretty quiet! really a great device.
Avi video logo. The print bed is really good. maybe too good. I had some problems detaching the final printed model from the print bed. you have a hint for this? I used a fine cutting knife now, but I'm afraid to damage the print map if this happens too often. I'm currently trying a bigger heat bed temperatur (now testing 60°C instead of 50°C with PLA) and I tried to increase the Z-offset in the touch screen menu by +0.05 but I'm not sure if that worked.
I have not tried WLAN yet, because I'm not sure if I need to do auto-level again, after flashing the FTF for new WLAN settings? Does it forget previous auto-level settings when flashing or is it okay to do?
Do I need to clean the print bed with alcohol or something? Or just scrape away the rest with the tool and it is fine?
Cura For Biqu Download
When I increase the print speed with the touch screen, does it increase the filament extrude relatively? Or do I need to increase that too, when increasing the normal speed? I'm asking this because there are these 2 settings in the menu when printing. Example: I set move speed from 100% to 150%. do I need to set extruder speed also to 150% so the layers are not getting thinner due to the faster movement?
Bluestacks 4 specs. Regarding optimal print / cura setting I'm still experimenting. but my first demo model from the SD card looks great. even in 0.2mm layer height.
Cura For Biqu
Cura For Biqu
the manuel is good for a quick start and get into printing, the rest of the touch sceen options are not in the manual. Handbrake ts to mp4. maybe you can put in a link where to read about all the options and settings that are possible. This would be cool especially for beginners like me.
I had a little problem with 2 screw holes of the side panels that I had to assemble in the last step. The holes where too big and the thumb-screw not holding anymore. I fixed this with an M4 nut mounted behind the screw. now it holds perfectly. But this could be improved.
I had another problem with the noice while printing the first model. there was a loud rattling when the X-axis moved. after some investigation, I fixed this with some simple silicon oil on the metal rods and moved the printer head down and up a few times. now the rattling is gone and the printer is really pretty quiet! really a great device.
Avi video logo. The print bed is really good. maybe too good. I had some problems detaching the final printed model from the print bed. you have a hint for this? I used a fine cutting knife now, but I'm afraid to damage the print map if this happens too often. I'm currently trying a bigger heat bed temperatur (now testing 60°C instead of 50°C with PLA) and I tried to increase the Z-offset in the touch screen menu by +0.05 but I'm not sure if that worked.
I have not tried WLAN yet, because I'm not sure if I need to do auto-level again, after flashing the FTF for new WLAN settings? Does it forget previous auto-level settings when flashing or is it okay to do?
Do I need to clean the print bed with alcohol or something? Or just scrape away the rest with the tool and it is fine?
Cura For Biqu Download
When I increase the print speed with the touch screen, does it increase the filament extrude relatively? Or do I need to increase that too, when increasing the normal speed? I'm asking this because there are these 2 settings in the menu when printing. Example: I set move speed from 100% to 150%. do I need to set extruder speed also to 150% so the layers are not getting thinner due to the faster movement?
Bluestacks 4 specs. Regarding optimal print / cura setting I'm still experimenting. but my first demo model from the SD card looks great. even in 0.2mm layer height.
Cura For Biqu
I'll write a bigger review on amazon when I played a bit more with it. but for now it's a pretty nice printer I would recommend.
